Fortunately, you can find a lot of advice for commercial stone floors online. Until they see a dirty one, many don’t realize how important is commercial stone care Long Island City, NY. People pass through business buildings every day, and because the floors are usually kept clean, they don’t give them a second thought. It would be obvious if they were filthy, soiled, or otherwise revolting-looking. In addition, whether you realize it or not, customers are affected by your business’s flooring.
Avoid Abrasive Cleaners
You should avoid using abrasive cleaners to care for commercial stone flooring. Acidic and abrasive cleaners can dull or scratch stone surfaces. Scrubbing pads and steel wool can scratch and dull stone surfaces. Instead, use a microfiber cloth to clean spills. When in doubt, diluted soap and water is the safest solution. You can also wipe spills using a wet microfiber cloth.
You can invest in a stone sealant if you want to protect your commercial stone floors from stains and damage. You can purchase stone sealants online or from any hardware store. This simple solution is easy to apply and will protect the stone from stains and water. Just make sure to let it dry completely before continuing. Stone sealants will also provide a smooth, protective barrier and resist moisture.
Avoid Dragging Furniture
You can follow a few simple steps to maintain the beauty of your commercial stone floor. Place mats near entrances to prevent dirt from tracking into your home. Vacuum regularly and dust with a dry mop to remove debris. Caulk joints where water or chemicals may be present to prevent damage. Place protective feet on the bottom of furniture legs. When moving furniture, avoid dragging them over the stone floor.
Place caution signs on the floor before performing any maintenance work if possible. Please do not remove them until the floor has completely dried. In case of accidents, do not remove caution signs. Ensure the safety of everyone by retaining extra stones for emergency repairs. The stone should not be exposed to extreme temperatures or humidity as it may damage the grout or setting materials. Therefore, it is important to avoid dragging furniture or equipment over commercial stone floors.
Clean With A Sponge Or Mop
Cleaning a stone floor requires a specific approach. It is important to use the correct cleaning solution to avoid damage to the surface. If you use acidic or harsh cleaning solutions, they may harm the natural minerals in the stone. To clean natural stone floors effectively, use a pH-neutral wash. A microfiber mop can clean the surface, and a steam cleaner can help remove stubborn stains.
If you’re using a sponge or mop, choose one with a wringer. These mops are ideal for cleaning up spills, but you need to use a strong enough wringer to get the liquid out of the sponge. Also, always remember to rinse your sponge thoroughly before storing it. It will help keep germs at bay. Then, you’ll have a clean, germ-free floor.
Avoid Acid-Based Cleaners
When it comes to stone floors, the best way to care for them is to avoid using acid-based cleaners. The chemical action of acids on natural stone creates oxidation. In such a case, the stone can be repaired by applying stone-specific cleaners and sealing it to prevent future oxidation blooms. Surface etching, on the other hand, can leave a permanent white film on stone floors. While water can remove this, it will not remove the powder permanently. Instead, you must contact the stone installer to determine what caused the moisture.
To protect your stone floors, it is recommended to use neutral or acid-free cleaners. Never use acidic or strong alkaline cleaners for their care. These cleaners can etch or dull the stone surface. Make sure to test the product on a small piece of stone left after installation before using it on the entire floor. The pH-neutral cleaner will also reveal whether it causes etching or erosion.
Clean With Non-Wax Compound
A non-wax cleaning compound can help prevent crystallization, a buildup of mineral deposits that can harm your commercial stone floor. It takes longer for a non-wax cleaning product to form a buildup. Using a proper maintenance program is vital in preventing crystallization. Follow the cleaning instructions carefully to protect your investment.
When cleaning stone flooring, avoid using acid-based cleaners or abrasives. Acid-based cleaners may permanently damage your stone floor. It’s best to mop natural stone floors at least once a week to remove dust and dirt. Avoid using an old toothbrush, as this can erode the finish. Instead, use a soft cloth or sponge to clean the surface. Never use an old toothbrush to scrub the floor, as this will cause irreparable damage.
No Comments